Boats and Kayaks

Boats and Kayaks

Kayaks, Safety Fog Horns, Trolling Electric Outboard Motors, Hot Cutting Knives, Electric Winches, Navigation Lights, Halogen Searchlights, Anchors, Anchor Kits, Paddles,

86lbs 'X'Sports Sea Trolling 24v Outboard Copper Coil Motor

Add to cart
'X'Sports
2636
    Delivery time:<3.30pm Next Work Day

2 Year Warranty. Very powerful product.

Leisure Pursuits are so proud of the success over the last 4 years, of this product that we are providing a full 2 year totally unconditionally warranty. If it develops a fault within that timeframe we will fix it or replace it FOC.

The 'X'Sports 24v 86 lbs Electric outboard motor offers the very best in power, reliability and durability with a Copper coil motor, not a cheaper inferior aluminium coil motor. Designed for both salt and freshwater, the super strong composite fibre glass shaft is stronger than steel yet flexes on impact and therefore will not break, kink or corrode.

With its 3 blade weed-less propeller and sea water anode kit with stainless bolts/nuts, 5 forward and 3 reverse speeds. With a durable all aluminium head, you won't find a better value electric outboard motor anywhere. Such is the durability of our product over the last 4 years that we have never had to replace any component, be it a propeller blade or speed control etc. for any of our buyers. Though we do stock and sell all spares for ours and other similar outboard motors such as Bison

The engine can be lifted with the push of a button. The depth of immersion into the water and the force of the propeller are all adjustable. You’ll will always know how much battery charge you have remaining with the 10 point LED battery meter. Both CE and ROHS certificates are available.

  • Sea water kit included consisting of 304 Stainless steel screws, bolts, nuts, 3 blade propeller with anode

  • 100mm - 150mm adjustable extending tiller

  • A true weed-less 3 blade swept back machete power propeller of patented design avoids draining valuable battery power by pushing weeds away.

  • Durable multi-position angle adjustment aluminium mount

  • Copper coil motor

  • Durable all aluminium head

  • CE and ROHS certificated

  • Full operation manual included

  • Suitable for larger sea boats using 16ft boats at 4mph in reasonable conditions holding 6-8 people

  • Transom bracket is super strong and fitted with a propriety lever lock system

  • Unique traceable serial number for every motor we sell

Specifications

  • Shaft water depth: 92cm (Adjustable down to 76cm)

  • Voltage: 24V

  • Output power: 1164 watts (48 amps)

  • Thrust: 39.4kg (86lbs)

  • Propeller Traction: 2050kg

  • Gross weight: 12.7kg

  • Horse power: 1.60

  • Includes 1.5m battery cable and clips

  • Requires 2 x 12v battery in series or a 24v battery (not included).

For this engine we suggest a 80amp to 150amp AGM deep cycle leisure battery (As used in caravans). With this battery the motor should function from 4 to 5 hours.

 

Trevor Gladding - Excellent piece of kit at good price with top end performance 

12v Marine Fog Horn Trumpet 115db Boat Truck Stainless Steel

Add to cart
'X'Sports
2639
    Delivery time:<3.30pm Next Work Day

12v Electric Marine Fog Horn 115db Stainless Steel

This super quality marine standard 100% stainless steel electric trumpet is a must for your boat, yacht, truck or mobile home. No compressed air supply is required for this product and is complete with brackets and 12v DC wiring for an easy installation. Ideal for use in any salt water environment. This high quality polished stainless steel marine horn gives off a very loud 115dB high tone trumpet horn audio output. 

 

Suitable for any marine installation that requires a rust free product and requires you to ‘grab’ someone’s attention. Everything required to emit the super loud 115dB high tone sound is contained within the compact housing of this unit and requires only a 12v 3a DC power supply to operate.

 

Specification:

  • No air system required
  • Power requirement: 12v 3A
  • Audio Output: 115dB (+/- 5dB) High tone trumpet effect
  • Construction: All stainless steel rust free with a polished chrome effect
  • Two fixing plates, one of which slides are included and rubber suppressing mats
  • Dimensions: Length 410mm x Height 126mm x Width 100mm. Trumpet mouth diameter is 97mm
  • Weight: 1.3kg

Inflatable Streamline Kayak Two Person with Aluminium Paddles

Add to cart
'X'Sports
2640
    Delivery time:<3.30pm Next Work Day
Summer Bargain at a Special Price

Aron Belowski - Brilliant Kayak! Already used it. So much fun and it is 100% safe

Why buy this Kayak! 

  1. Streamline design
  2. Load capacity is a huge 200kg where most other inflatable kayaks are only 160kgs
  3. Inside width is 43cm suitable for most people. Other kayaks will only be 33cm or less
  4. Inflatable Kayak with total width of 76cm. Very important for stability. Other kayaks will only be 70cm or less
  5. Five separate air chambers for maximum confidence
  6. Included: 2 x Double aluminium paddles (Not nylon as other inferior materials), Large foot pump, Repair kit, Strong carry bag.
  7. Cargo net that can be fitted at either end of the kayak
  8. Safety grab rope and secure cleats, all round the kayak

9.    Manufactured from heavy duty PVC material providing  a good armour against cuts and abrasions and is easy to repair in case of a puncture using the supplied repair kit.

The ‘X’Sports deluxe streamline design makes for easy paddling on both lakes, rivers and mild sea conditions, while still remaining lightweight and compact. The cockpit features 2 inflatable seats with backrests and a cargo net for easy storage. 

 

The ‘X’Sports design allows for easy assembly with a comfortable interior space and is ideal for any outdoor recreation event including fishing, exploring and cruising. The inflatable kayak packs down into a small compact unit. Could be transported in a suitcase for use on holidays. 

Features:

  • Two person inflatable kayak ideal for outdoor water sport
  • Five air chambers including the two inflatable seat backs
  • Two double aluminium paddles included that can be disassembled when not in use. Adjustable length's 176cm and 236cm. 
  • Integrated spray deck at bow and stern
  • Material: Heavy duty PVC 0.4mm thick
  • Quick inflation and deflation valves
  • Maximum load: 200kg (440lbs)
  • Size: L351cm (11ft 6ins) x 76cm (2ft 6ins") x 38cm (1ft 3ins"). Pack size: 62cm (24.5") x 20cm (8") x 29cm (11.5")
  • Weight: 8kg
  • Repair kit included
  • Foot pump included
  • Comfortable and lightweight. Tough and Durable 
  • Nylon mesh carry bag included

The kayak safety valves are equipped for quick inflation and deflation. Fitted with a grab line on both ends and a cargo net for extra storage.

 

Safety: ALWAYS WEAR A BUOYANCY VEST! You are responsible for your own safety so please be careful, where and how used. Clean with fresh water after use, fold carefully and store in a cool dry place. Always check thoroughly before re-use.

Rope Cutter - 'X'Sports Portable Hot Knife

Add to cart
'X'Sports
2588
    Delivery time:<3.30pm Next Work Day
Cuts Synthetic Rope Cords, Sail Cloth, Webbing

The lightweight 'X'Sports Rope cutter and hot knife will cut and seal the edges of most synthetic materials with very little effort. It heats up to 500 degrees C in just 6-8 seconds, for sealing with minimum smoke and no burnt edges. Standard 'R' blade supplied is suitable for cutting and sealing rope up to 17mm in diameter. The cutter gives a clean neat cut that also prevents rope/braid from fraying. The additional 'F' blade supplied will cut webbing to max 55mm width. Uses include webbing, belting fabric, elastic, cord, ropes, sail cloth, awnings, nylon and synthetic fabrics.

A quality product that’s boasts a spring loaded safety trigger ON/OFF switch, Double overheat protection for thermostat, purpose made heavy duty storage box and certificated to every European standard for conformity and compliance. 

  • Supplied with hanging hook and 3m of power cord 
  • Standard  ‘R’ blade: W32 x D5mm - Ropes, Fabrics, Sail Cloth.
  • Webbing  ‘F’ blade: W60 x D5mm – Ideal for cutting Webbing with a max width of 55mm
  • Blades operating temperature = 500°C
  • Operates continuously when trigger held down
  • Heat controlled by switching the spring loaded safety trigger switch on and off
  • Storage box dimensions: 29cm x 19cm x 9cm
  • Voltage: 240v . Frequency 50hz/60hz
  • Wattage: 60w of Power
  • Brass wire brush included and spanner
  • Product Weight: 0.95kg
  • Certificated Conformity to EN 60335-1:2012, EN 60335-2-45/A2:2012, EN 62233:2008. Copies available
  • Certificated Compliance to EN 55014-1/A2:2011, EN 55014-2/A2:2011, EN 61000-3-2/A2:2009, EN61000-3-3:2013. Copies available
  • Fitted with a 3 pin mains plug to BS1363

To further enhance this excellent product, we can also offer the following optional accessories listed separately

  1. Cutting Foot - This Cutting Foot is a specially designed cutting foot that eliminates the need for a destructive cutting surface when using a hot knife. You can cut canvas right on your hardwood floors or webbing out on your boat without leaving black gouges and cut marks from the red-hot cutting blade. This cutting foot also holds the material down whilst cutting to minimize edge curling and provide a high quality cut and seal.
  2. Hot Knife 'R' Blade - Suitable for cutting and sealing rope up to 17mm in diameter. This cutter blade gives a clean neat cut that also prevents rope/braid from fraying. 
  3. Hot Knife 'F' Blade - Will cut webbing precisely and automatically seal in one motion. Cutting area width maximum 45mm. 
  4. Hot Knife 'VR' Blade - Cutting blade that allows for top and bottom heating which is excellent for cutting and sealing of thicker fabrics of awnings, sails, netting and webbing. 

HOT KNIFE CUTTER CORDLESS, ROPE, SAIL CLOTH, WEBBING, PROFESSIONAL CUTTER

Innovative Product
Add to cart
'X'Sports
2629
    Delivery time:<3.30pm Next Work Day
2 Year Warranty

*** Totally unique for 2018 in the UK and Europe, an exclusive Leisure Pursuits Cordless version of this superior product. This product now provides a unique advantage in your boat by providing a tool that is always available for that unexpected tangle of fabric or rope and a person ***

 

The  Cordless rope cutter and hot knife will cut and seal the edges of most synthetic materials with ease and very little effort. It heats up to 500 degrees C in just 6-8 seconds, for sealing with minimum smoke and no burnt edges. Standard 'R' blade supplied is suitable for cutting and sealing rope up to 17mm in diameter. This cutter gives a clean neat cut that also prevents rope/braid from fraying. Uses include webbing, belting fabric, elastic, cord, ropes, sail cloth, awnings, nylon and synthetic fabrics.

A quality product that’s boasts a spring loaded safety trigger ON/OFF switch, Double overheat protection for thermostat, purpose made heavy duty storage box and certificated to every European standard for conformity and compliance. (Copies available)

 

  • Standard  ‘R’ blade: W32 x D5mm - Ropes, Fabrics, Sail Cloth, Webbing.
  • Blades operating temperature = 500°C
  • Operates continuously when trigger is held down
  • Storage box dimensions: 29cm x 19cm x 9cm
  • Voltage: 240v. Frequency 50hz/60hz
  • Wattage: 21.6w to 29w/hour
  • Charging period: About 60 minutes
  • Continuous use: One full charge should provide 25 minutes continuous use
  • Brass wire brush included and spanner
  • Product Weight: 0.95kg
  • Certificated Conformity to EN 60335-1:2012, EN 60335-2-45/A2:2012, EN 62233:2008. Copies available
  • Certificated Compliance to EN 55014-1/A2:2011, EN 55014-2/A2:2011, EN 61000-3-2/A2:2009, EN61000-3-3:2013. Copies available
  • Charger fitted with a UK 3 pin mains plug BS1363
  • UK Service centre. You can be confident that in the very un-likely event that something should go wrong with this item, that there is a fully qualified team of technicians and full spares backup here in the UK.

  • 12 Months Manufacturers UK unconditional Warrantee on this item

5000lbs Electric Recovery Cable Winch ATV Trailer Marine 12V R/Control

Add to cart
'X'Sports
2637
    Delivery time:<3.30pm Next Work Day
12V 5000 LBS HEAVY DUTY ELECTRIC WINCH

This versatile ‘X’Sports electric winch has a mounting plate that fits over a tow hitch or can be fixed to anything static using the winch mounting plate. This heavy duty 12v electric winch is suitable for all marine applications and is fully waterproof. You could mount the fixing plate to the deck of your boat or to your trailer in or outside your vehicle. Winch can also be fixed to an ATV or Quad Bike. Enables positioning of boats, caravans and trailers. 

With features such as an impressive winch speed of 6 feet per minute using a high tensile steel cable of some 30 feet in length, a rolling load of 5,000lb, remote control, fixed mounting plate and tow-hitch bracket makes this electric winch an impressive and versatile performer. Superbly engineered, rugged, safe and strong with full CE certification to all relevant sections of EN 61000.

Features: 

  • Capacity of 5,000lb for rolling load.
  • Maximum 2,000lb of static pulling load on level ground. VERY IMPORTANT NOTE BELOW! 
  • Line speed of 6 feet per minute with load.
  • Cable length of 30 feet including hook.
  • Wired remote switch with 10ft length of cable for greater flexibility of operation
  • Mounting bracket for tow-bar.
  • Mounting plate allows for 3 x 3/8" fixing bolts to any flat surface.
  • Built in carry handle.
  • Optional emergency manual cranking handle supplied as standard.
  • Optional waterproof cover supplied as standard.  

Specification: 

  • Automatic resetting circuit breaker for load protection.
  • All relevant components are made from hardened steel.
  • Power requirement: 12v for permanent magnet motor.
  • Power lead 10ft in length supplied
  • Overall dimensions: L210mm x W229mm x H172mm.
  • Weight: 7.3kgs
  • CE certified to EN 61000 (Copy available).
  • Mooring hook fitted with safety pull clip. 

Before purchase you must factor in the following for the load placed on this winch. Rainy conditions, a slipway that is wet and encrusted with seaweed, a sandy beach, the state of your dolly wheels, ANY angle to your trailer will all have  the sum effect of reducing the ability of the winch to handle its STATIC LEVEL GROUND capacity. If all these factors apply to your application, than we would roughly approximate the maximum load weight to be around 400lbs (181 kgs). We will NOT accept the return of this winch when used outside these stated parameters.

9900lbs Electric Recovery Cable Winch ATV Trailer Marine 12V R/Control

Add to cart
2638
    Delivery time:<3.30pm Next Work Day
12V 9900LBS BOAT HEAVY DUTY ELECTRIC WINCH 

This versatile ‘X’Sports electric winch has a mounting plate that fits over a tow hitch or can be fixed to anything static using the winch mounting plate. This heavy duty 12v electric winch is suitable for all marine applications and is fully waterproof. You could mount the fixing plate to the deck of your boat or to your trailer in or outside your vehicle. Winch can also be fixed to an ATV or Quad Bike. Enables positioning of boats, caravans and trailers. 

With features such as an impressive winch speed of 6 feet per minute using a high tensile steel cable of some 30 feet in length, a rolling load of 9,900lb, remote control, fixed mounting plate and tow-hitch bracket makes this electric winch an impressive and versatile performer. Superbly engineered, rugged, safe and strong with full CE certification to all relevant sections of EN 61000.

Features: 

  • Capacity of 9,900lb for rolling load.
  • Maximum 3,500lb of static pulling load on level ground. VERY IMPORTANT NOTE BELOW!
  • Line speed of 6 feet per minute with load.
  • Cable length of 30 feet including hook.
  • Wired remote switch with 10ft length of cable for greater flexibility of operation
  • Emergency hand cranking handle.
  • Mounting bracket for tow-bar.
  • Mounting plate allows for 3 x 3/8" fixing bolts to any flat surface.
  • Built in carry handle.
  • Optional emergency manual cranking handle supplied as standard.
  • Optional waterproof cover supplied as standard.  

Specification: 

  • Automatic resetting circuit breaker for load protection.
  • All relevant components are made from hardened steel.
  • Power requirement: 12v for permanent magnet motor.
  • Power lead 10ft in length supplied
  • Overall dimensions: L241mm x W241mm x H203mm.
  • Weight: 11kgs
  • CE certified to EN 61000 (Copy available).
  • Mooring hook fitted with safety pull clip.

Before purchase you must factor in the following for the load placed on this winch. Rainy conditions, a slipway that is wet and encrusted with seaweed, a sandy beach, the state of your dolly wheels, ANY angle to your trailer will all have  the sum effect of reducing the ability of the winch to handle its STATIC LEVEL GROUND capacity. If all these factors apply to your application, than we would roughly approximate the maximum load weight to be around 700lbs (318 kgs). We will NOT accept the return of this winch when used outside these stated parameters.

LED Navigation Light Port, Starboard & Masthead Boat Yacht

Add to cart
'X'Sports
2627
    Delivery time:<3.30pm Next Work Day
LED Navigation Light Port, Starboard & Masthead 

A marine grade LED navigation light set with stainless steel sides. Made from UV stabilised ABS plastic with shatter proof acrylic lens. Complete with a secure water resistant seal to IP66. Our marine navigation lights are made from a proven and robust design which are engineered to last. These LED lights have a dramatically longer working life in comparison to standard bulbs and also draw less power, meaning less battery drain.

Features:

  • Designed specifically for marine conditions in sea, ocean or lake
  • High quality marine grade navigation lights with stainless steel sides to the port and starboard lights.
  • Port, Starboard and Masthead lights manufactured from UV stabilised marine grade ABS plastic
  • Shatterproof acrylic lens
  • Energy-efficient design allowing an economical solution to illuminate your boat at night without the worry of excessive battery usage
  • Water resistant seals to provide long term reliability and safety to IP66 standards
  • Visibility - 2 Nautical Miles plus
  • LED beam angles – Masthead 160 degrees. Port & Starboard 90 degrees
  • 12v Voltage using only 0.5 watts of power
  • Dimension: L65mm x D56mm x H75mm
  • Full specification sheet provided

Marine Searchlight Remote Control. 35w Halogen Boats/Yachts, Motor-Home

Add to cart
'X'Sports
2642
    Delivery time:<3.30pm Next Work Day
Marine Searchlight Remote Control. 35w Halogen 

This high power HID Halogen powered remote controlled searchlight has been designed and manufactured exclusively for Leisure Pursuits. This product has been 100% quality checked to our high standards and offers exceptional light output performance and high quality build specification. This product is a perfect blend of performance and a cost effective solution for harsh environments. The sleek low profile design enables the modern aesthetics to blend perfectly into any boats profile.

The searchlight is very powerful for its size with a sealed beam 35w halogen output capable of projecting at least 200 metres at 1 lux brightness and at least 7 lux at 100 metres. Horizontal movement is a huge 320 degrees and vertical movement is 75 degrees. Monitor is manufactured from a UV stabilised ABS material and is water resistant (IP54). Complete with 15ft of power cable and a fully weatherproof remote control switch.

Features:

·        Power output 35 watts at 12 volts. Lamp life in excess of 3000 hours. Colour rendering is Cool White. Provides higher brightness and greater illumination than conventional searchlights.

·        Touch sensitive remote control allows movement in four directions, including a touch sensitive on/off switch. Remote control is totally portable and runs on a PP3 battery (2 x PP3 batteries supplied) 

·        Suitable for mid-size boats, larger motor-homes, home lighting, high speed emergency vessels and vehicles

·        Long life gear drive with a low amperage draw. Clutch mechanism prevents motor damage when running against the limit stops

Remote Controlled Marine Search Light 100w Halogen. Powerboats, Cruisers, Fishing Boats

Add to cart
'X'Sports
2625
    Delivery time:<3.30pm Next Work Day
Remote Controlled Marine Search Light 100w Halogen 

This high power Halogen powered remote searchlight has been designed and manufactured exclusively for Leisure Pursuits. This product has been 100% quality checked to our high standards and offers exceptional light output performance and high quality build specification. This product is a perfect blend of performance and a cost effective solution for harsh environments. The sleek low profile design enables the modern aesthetics to blend perfectly into any boats profile.

The searchlight is very powerful for its size with a sealed beam 100w halogen output capable of projecting at least 300 metres at 1 lux brightness and at least 7 lux at 100 metres. Horizontal movement is a huge 320 degrees and vertical movement is 75 degrees. Monitor is manufactured from a UV stabilised ABS material and is water resistant (IP54). Complete with a fully weatherproof, water resistant (IP54) wired remote control switch and 15ft of cable.

Features:

·        Power output 100 watts at 12 volts. Lamp life in excess of 3000 hours. Colour rendering is Cool White. Provides higher brightness and greater illumination than conventional searchlights.

·        Touch sensitive remote switch allows movement in four directions, including a touch sensitive on/off switch. Remote switch can be mounted flush within your existing control panel

·        Suitable for mid-size boats, larger motor-homes, home lighting, high speed emergency vessels and vehicles

·        Long life gear drive with a low amperage draw. Clutch mechanism prevents motor damage when running against the limit stops

 

Control unit front 135mm x 89mm. Back 80mm x 75mm. Deep 32mm (6mm lip front plate). Hole centres 118mm

Kayak Deluxe Fishing Rod Holder. Boat Adjustable Fishing Rod Holder

Add to cart
'X'Sports
2651
    Delivery time:<3.30pm Next Work Day
Fishing Rod Holder

Our Kayak or Boat fishing rod holder can easily adjust for your fishing rod from a 5 degree to a 95 degrees of tilt. The fishing rod holder can also rotate a full 360 degrees rotation without any problem of an obstruction. It is a full 20cm in length to enable a secure and firm location for your fishing rod. Easily to install and is suitable for most fishing rods between 36mm (Top of throat) - 40mm (Bottom of throat) maximum diameter.

The kit flexibility allows you to either mount the unit in the base of the kayak or vertically on the side of a boats gunwale. We also provide an additional mount which allows you to clamp to a boats horizontal guard rail. When mounted in the base of a boat the flexible nylon ball joints allows full flexibility of movement during use. Your fishing rod can be secured in the holder with a soft latching strap which snaps over the top of the holder.

A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holders design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts also easily clear the sides of the rod holder for quick rod retrieval.  Constructed in a strong nylon material that is both resilient and long lasting.

Hand Gear Winch 2 Speed Wire Cable Trailer Marine Winch 10 Metres 2,500 LB

Add to cart
'X'Sports
2574
    Delivery time:<3.30pm Next Work Day
Marine Winch 10 Metres 2,500 LB

Mrs E L Hamlin - Very robust winch and cable - to replace a weaker model. Double teeth to reduce wear

This superb quality engineered product is a huge 2,500 lbs capacity wire cable manual winch. Complete with a two speed gear option and a large 10 metres of 5mm diameter cable. The winch features hardened steel double gear teeth with a smooth action and supported on a heavy plate chassis coated for corrosion resistance.

2,500lbs Hand Cable Winch pulling and out load

Wire Cable length of 10m with a diameter of 5mm

Zinc plated heavy gauge frame

Smooth action ratchet crank locking system

Hardened steel double rows gear teeth

Mooring hook fitted with a safety pull clip

2 Speeds for maximum flexibility (Double geared)

Maximum traction capacity is 2,500daN

Weather Resistant

Size of mounting plate. 12cm width x 19.8cm length with fixing screw holes

Anchor Adjustment Trolling Kit for Kayaks

Add to cart
'X'Sports
2618
    Delivery time:<3.30pm Next Work Day
Anchor Adjustment Trolling Kit for Kayaks

*** ALL FIXINGS ARE A4 MARINE GRADE STAINLESS STEEL ***

Kayak or Canoe Anchor Adjustment Kit. This kit allows you to move the anchor forward and backwards to provide precise positioning of the kayak while you are fishing or just anchored up. Using our simple pulley system with a zigzag cleat lock, you can angle your boat in any direction needed and place yourself in a position to allow you to fish. Manufactured exclusively to Leisure Pursuits drawings and specification.

Kit includes:

  • 9m of 4mm braided line (polypropylene 8 ply)
  • 2 x Marine grade stainless steel pulleys with nylon sleeves
  • 2 x Stainless steel 6mm snap hooks
  • 40mm Dia. nylon round rigging ring (10mm Rim)
  • Zigzag cleat
  • 2 x Nylon pad eyes
  • Mounting hardware pack includes 6 well nuts with stainless steel screws but does not include an anchor

Features:

  • Removable and reusable snap-in feature to facilitate multiple assembly
  • To use with standard metric machine screws
  • Can be used in blind burr free holes and will not damage finished surfaces
  • Suitable for marine applications and uses marine grade stainless steel
  • Helps seal ambient moisture and absorb noise
  • Electrically neutral and isolates
  • Will dampens vibration and minimise shock
  • Perfect for metal-to-plastic and other mixed material assemblies
  • Resistant to weathering in outdoor conditions

Well nuts are simple to install, simply place well-nut insert into a pre-drilled hole until the flange is firmly against the mounting surface. Push the machine screw through the part to be fastened and tighten. The flanged neoprene bushing with a captive brass nut, is designed to provide a shock and vibration resistant fixing. The removable blind screw anchor is suitable for many  applications and conditions. From thin gauge metals to plastic sheet to 16.5mm thick. The high radial expansion even allows use in solid materials.

Claw Bruce Style Anchor Galvanised - Boat Yacht Dinghy Jet-ski

Add to cart
'X'Sports
2602
    Delivery time:<3.30pm Next Work Day
‘X’Sports Bruce Style Anchor Galvanised

This anchor type was designed for oil rigs in the North Sea. These smaller versions have found very happy customers on yachts and boats everywhere. The Bruce or Claw anchor design rights itself and quickly ploughs into the bottom. There is less likelihood of this anchor pulling out but if it does the Bruce anchor resets quickly helped by the large claws. This anchor will sit nicely at the bow because it is easy to pull up from straight above like other plough type anchors. It will rarely collect a rock in the claws and can't set.

Features:

  • Hot Dipped Galvanised Steel ‘X’Sports Specification for lasting corrosion protection.

  • This bruce style anchor type was originally designed for oil rigs in the 70’s.

  • Anchor is cast from one piece with no moving parts.

  • This type of anchor will land properly and hold well in sand, mud and rock, not so good on hard ground.

  • This anchor has a good power to weight ratio

  • Super holding power anchor with a good reputation of not breaking out due to wind or tide changes.

  • Weight: 5kg

  • Dimensions: 5kg = L470mm x W310mm x D270mm. 7.5kg = L530mm x W345mm x D300mm. 10kg = L540mm x W380mm x D330mm

Telescopic Paddle for Canoe, Kayak, Dinghy or Surf Board

Add to cart
'X'Sports
2422
    Delivery time:<3.30pm Next Work Day
Telescopic Paddle for Canoe, Kayak, Small Dinghy or Surf Board

Versatile canoe paddle that adjusts from 138cm to 184cm. A unique concept in canoe paddles

With a Super strong polyethylene blade 17cm wide x 45 cm long, and a moulded 'T' handle on the heavy duty aluminium shaft these are light and robust. The adjustable length is able to accommodate all peoples heights for canoe, inflatable dinghy, small boat, surf board or kayak

An excellent value paddle with a strong and robust polypropylene blade giving you confidence on the water. Manufactured with an aluminium shaft the paddle is light weight and yet strong. Ergonomically designed with a moulded contour handle for optimum comfort and easy grip.

Ø       Paddle is infinitely adjustable between 138cm and 184cm in length

Ø       Total weight of paddle is 0.6kg

Ø       Bright paddle and handle are designed to allow easy retrieval if lost overboard

Ø       Lightweight and durable, this is the perfect all-purpose paddle.

Ø       An 17cm x 45cm blade adds power to your stroke.

Ø       A tempered aluminium shaft with a ideal shaped grip for sure handling. Blade and T-grip are moulded of high impact polypropylene.

Ø       Durable double clip lock to hold the shafts firmly in place

Ø       Can be used sitting in a canoe or as a stand up paddle for a surf board

Pair Telescopic Canoe Kayak Dinghy SurfBoard Paddles

Add to cart
'X'Sports
2422
    Delivery time:<3.30pm Next Work Day
Pair Telescopic Canoe Kayak Dinghy SurfBoard Paddles

Pair of versatile canoe paddles that adjusts from 138cm to 184cm. A unique concept in canoe paddles

With a Super strong polyethylene blade 17cm wide x 45 cm long, and a moulded 'T' handle on the heavy duty aluminium shaft these are light and robust. The adjustable length is able to accommodate all peoples heights for canoe, inflatable dinghy, small boat, surf board or kayak

An excellent value paddle with a strong and robust polypropylene blade giving you confidence on the water. Manufactured with an aluminium shaft the paddle is light weight and yet strong. Ergonomically designed with a moulded contour handle for optimum comfort and easy grip.

Ø       Paddle is infinitely adjustable between 138cm and 184cm in length

Ø       Total weight of paddle is 0.6kg

Ø       Bright paddle and handle are designed to allow easy retrieval if lost overboard

Ø       Lightweight and durable, this is the perfect all-purpose paddle.

Ø       An 17cm x 45cm blade adds power to your stroke.

Ø       A tempered aluminium shaft with a ideal shaped grip for sure handling. Blade and T-grip are moulded of high impact polypropylene.

Ø       Durable double clip lock to hold the shafts firmly in place

Ø       Can be used sitting in a canoe or as a stand up paddle for a surf board

!